The AD Series units may be used to supply mobile radios and other appliances from?AC mains used in offices, portable site cabins, communication cabins, telephone?exchanges, remote antennae sites, ships, oil rigs etc. The units will accept either?European 230Vac or US 115Vac inputs and are available as standard in 12V, 24V and?48V output configurations.?Input is via a standard IEC-320 C13/14 power cord with?UK, European or US mains plugs -?please state your requirement.
There?s nothing worse than a power?supply lying around on the floor. The?T-shaped mounting clip, common to?many Alfatronix products, allows the?power supplies to be installed quickly?and simply in many out of the way?locations, such as underneath desks or?on walls. The 3 point ?T? clip can be?fitted securely, even on uneven surfaces,
quickly and simply, and then the power?supply simply ?clips? in place.
A fixed voltage battery charging facility?is also available with the supplementary?loom; P/N AD BB loom.
The AD Series supplies have transient,?overload and overheat protection for?reliable operation even in the toughest?environments.
These units, often referred to as ?brick?in the lead? supplies are housed in a?rugged, corrosion resistant anodised aluminium extrusion. The low mass
surface mount technology components?offer excellent resistance to shock and?vibration, thus further increasing the?reliability of these products.
?
A green LED indicates when there is?output from the converter. This gives?reassurance to the installation engineer?and speeds fault finding.
While the brick power supplies offer a?versatile solution, if you are powering a?mobile radio, try our Desktop Versions. These are configured?to attach to the radio forming one?dedicated unit and are available for a?variety of radios including Motorola,
Hytera, Tait, Kenwood, Icom, Maxon?and Vertex.
The product code is developed as follows taking the AD 115/230-12 108 as an example:
| AD | AC input and DC output |
| 115/230 | Denotes auto select US or European AC input voltage |
| -12 | Nominal 12V output |
| 108 | 108W capacity unit |
| Input voltage range | Auto-Select, 85-135Vac and 170-265Vac, 50/60Hz |
| Output voltage | 13.6Vdc, 27.2Vdc or 54.4Vdc, as ordered . Worst case limits are +/- 4% |
| Output noise | <50mV pk-pk at continuous load |
| Power Conversion Efficiency | Typically 85% |
| Isolation between input and case/output Isolation casework to ground | 1.5kVac/3.0kVac rms,
Connected directly to mains input ground |
| Normal operating temperature | -25?C to +30?C to meet this specification table
+30?C to +70?C de-rate linearly to 0A |
| Storage Temperature | -25?C to +100?C |
| Max case temperature | 70?C at full load with 25?C ambient |
| Operating humidity | 95% max, non-condensing |
| Casework | Anodized aluminium, glass-filled polycarbonate |
| Connections:
Input Output Ground |
IEC-320 C14 socket, C13 terminated cordset
6.3mm push-on blade terminals 6.3mm push-on blade terminals, adjacent to input (additional external ground if required) |
| Output Indicator | Green LED adjacent to output terminals |
| Mounting Method | ?Click ?n? Fit? mounting clip or rubber feet. DIN rails clips available required |
| Safe area protection:
Over Current |
Limited by current sensing circuit |
| Over heat | Limited by temperature sensing circuit |
| Output over voltage | Protected by independent shut down circuit |
| Transients | Protected by filters and rugged component selection |
| Catastrophic failure | Protected by input and output fuses |
| Approvals | 2014/30/EU The general EMC directive
2014/35/EU The low voltage directive 93/68/EEC The CE marking directive |
| Tested to | EN60950, EN55022, EN61204-3 |
| Markings | CE |
View The Company Page HERE
View Our LinkedIn Page HERE
| Manufacture | AlfaTronix |
|---|---|
| Input voltage range | Auto-Select, 85-135Vac and 170-265Vac, 50/60Hz |
| Output voltage | 12V |
| Output noise | <50mV pk-pk at continuous load |
| Power Conversion Efficiency | Typically 85% |
| Isolation between input and case/output Isolation casework to ground | 1.5kVac/3.0kVac rms, Connected directly to mains input ground |
| Normal operating temperature | -25?C to +30?C to meet this specification table +30?C to +70?C de-rate linearly to 0A |
| Storage Temperature | -25?C to +100?C |
| Max case temperature | 70?C at full load with 25?C ambient |
| Operating humidity | 95% max, non-condensing |
| Casework | Anodized aluminium, glass-filled polycarbonate |
| Connections: Input Output Ground | IEC-320 C14 socket, C13 terminated cordset 6.3mm push-on blade terminals 6.3mm push-on blade terminals, adjacent to input (additional external ground if required) |
| Output Indicator | Green LED adjacent to output terminals |
| Mounting Method | ?Click ?n? Fit? mounting clip or rubber feet. DIN rails clips available required |
| Safe area protection: Over Current | Limited by current sensing circuit |
| Over heat | Limited by temperature sensing circuit |
| Output over voltage | Protected by independent shut down circuit |
| Transients | Protected by filters and rugged component selection |
| Catastrophic failure | Protected by input and output fuses |
| Approvals | 2014/30/EU The general EMC directive 2014/35/EU The low voltage directive 93/68/EEC The CE marking directive |
| Tested to | EN60950, EN55022, EN61204-3 |
| Markings | CE |
| Amp | 3A |
| Power Supply Type | AC-DC |
