Author picture

Alfatronix: PowerTector PT40-L & PT60-L For LiFePO4 Batteries

ASSAMBLY

 PACKING CONTENTS
• 1 x PowerTector 3 x Screws
• 5 x Crimp Connectors 1 x Programming Lead
FEATURES
• 12V / 24V Automatic mode selection (12V mode 8<V≤17 , 24V mode
17<V≤35)
• 10 Programmable voltage settings
• Supplied with FASTON crimp connectors for low current connections
• IP65 rated
• Switch connection for remote on/off
• Connection for remote alarm
OPERATION
The PowerTector will guard against excessive battery discharge by disconnecting the
load before the battery voltage drops too low. One second after the battery voltage
drops below the disconnect threshold the alarm output will activate. If the battery
voltage is still below the disconnect threshold after a total of 10s the PowerTector will
disconnect the load from the battery and deactivate the alarm.
The load will remain disconnected until the battery voltage rises above the reconnect
threshold.
The PowerTector will protect the load by disconnecting it if the battery voltage
exceeds 19V on a 12V system or 32V on a 24V system.
ASSEMBLY
1. Select a cool and ventilated position to install the device which is not exposed to
direct sunlight.
2. Mount as close to the battery as possible using a wire of sufficient diameter.
3. Isolate the power to the wiring before commencing installation.
4. Mount using the three mounting holes with screws or bolts.
5. Connect the ‘ground’ terminal.
6. Connect the ‘input positive’ terminal.
7. If required program the unit as described below.
8. Connect the ‘output positive’ once no further programming is required.
9. Connect the alarm and switch if required.

PROGRAMMING

There are 4 settings that can be defined by the user, each setting is in a Program.
Family, as shown in the table below. Changing the setting within a Program Family
does not affect any other Program Family.
Program Family 1: Operating voltage range. P1-P10 (P1 is default).
Program Family 2: Alarm output mode.. P11 (default)—The alarm output will be
constantly active 1s after the voltage drops below the disconnect threshold. It will
deactivate if the voltage rises above the disconnect threshold or 10s after the voltage
drops below the disconnect threshold.
The alarm will activate in pulse mode if the battery voltage rises above 19V for a
12V system or 32V for a 24V system.
P12—The alarm output will be constantly active 1s after the voltage drops below the
disconnect threshold. It will deactivate if the voltage rises above the reconnect
threshold.
The alarm output will not activate if the voltage rises above the over-voltage protection level.
This mode can be used for enabling an external battery charger to replenish the
battery that the PowerTector is protecting.
Program Family 3: Switch terminal mode. P13 (default)—The PowerTector output is
disconnected when the switch terminal is connected to the negative terminal of the
battery.
P14—The PowerTector output is disconnected when the switch terminal is connected
to the positive terminal of the battery.
Program Family 4: Voltage range select. P15 (default)—The unit will automatically
select the voltage range (12V or 24V) each time power is applied.
P16—The unit will operate as a 12V unit only.
P17—The unit will operate as a 24V unit only.
To change a program:
1. Temporarily connect together the ‘input positive’ and the ‘program’ terminal
using the programming lead supplied.
2. The LED will start to flash, each flash indicates the program to be selected.
3. Keep the connection until the LED has flashed the number of times for the desired
program then remove the connection.
4. The LED will then flash the number of times to confirm the selected program.
Alarm** – The use of a relay requires a free wheeling diode to prevent damage – see
application note AN-PT01.


SAFETY


• This PowerTector is for ancillary equipment only. It must not be used to
disconnect equipment that is critical to the safe operation of the vehicle.
• The device must not be exposed to severe mechanical shocks.
• The device must not be exposed to extreme temperature, direct sunlight or
vigorous vibration.
• The device may only be used within a dry environment, such as a vehicle.
• Do not install this device on hot vehicle parts and ensure there is sufficient
space around the device for air circulation and cooling.
• The wiring harness should be protected by fuses.
• Observe the magnitude and polarity of the input/output voltage when
installing, incorrect polarity of the output could damage the circuit.
• Isolate the circuit before you connect or remove the device.
• Ensure that the output of the device is not short-circuited.
• Never open the device casing and never repair it. The device must be
replaced if it is damaged.

INDUCTIVE LOADS
The inductive load rating of this PowerTector is 1mH.
Do not exceed the specified inductive rating.
Inductive equipment includes; motors, pumps, refrigeration, relays, long
cables etc.
Conducted voltage transients must not exceed those specified by ISO7637-
2:2004 Level III
FUSING
The input and ground wiring must be fused appropriately.
For the ground, minimum 500mA to 1A maximum.

Shuki Swed

Shuki Swed

Sales ManageR

Sales Manager – Defense & Industrial
Linkedin Envelope

Contact

Shuki Swed -Sales Manger Defense & Industrial

MPD Logo

 

Memory Protection Devices, Inc. (MPD) is an ISO 9001 certified global manufacturer of battery holders, battery contacts, auto plugs, auto sockets, fuse holders, DC jacks, DC plugs, and other electronic components and devices. Our parts are manufactured to rigorous standards in factories located around the world, which meet not only our quality requirements, but our social ones as well. We believe that many components have not been given as much thought as they deserve, and every day we work to find the next innovative design. After all, a defective component can cause complete failure in most devices, and a poorly designed one can cause many inconveniences to end users. It is due to this core value that MPD is viewed as the industry’s leading innovator.
Corporate History
MPD was originally founded in 1980 by three executives with a wealth of experience in the electronics industry. Today, the company is being led into an era of fresh growth under a new president with over 30 years of experience. The company’s name, Memory Protection Devices, refers to the initial usage of our battery holders, which was to power CMOS RAM, a special type of computer memory that is used to store system settings. Although we are still protecting memory with our battery holders, MPD has since branched out and we now have a diverse line of products.
Fair Labor Policy
We firmly believe that fair trade includes having a positive and meaningful impact on the working and living conditions of the many workers involved in manufacturing our products around the world. We are committed to having our factories meet not only our products’ quality standards, but MPD’s social ones as well. Afterall, MPD is not just a manufacturer, but a part of the community we serve.

alfatronix_new

ABOUT ALFATRONIX

Whether you are installing critical radio communications, data tracking, visual displays, or navigation equipment. On a lorry, a bus, a fire engine, or even a luxury yacht. For business, for leisure, and for emergency services, you know that even the best product or the newest technology is only as good as the power supply supplying it. ​ At Alfatronix, we know this! A failed power supply or a failed converter is a failed system. That’s why we use only modern rigorously tested designs, automated assembly techniques, and an award-winning quality manufacturing system backed up by expert engineering support. With flexible working practices and short lead times, delivered to you fast by reliable carriers. ​ Wireless & USB Chargers for Coach, Bus and Car install, Voltage Converters, Low Voltage Disconnect, and Power Supplies for Communications, Marine & Railway Applications.

CATALOGUE
maskot logo

Mascot – a Scandinavian Pioneer in Electronics

Founded in 1938, Mascot was one of the radio manufacturing pioneers in Norway. From day one, our focus has been on meeting our customer’s demands, relentlessly finding ways to improve the quality of our products, and develop innovative solutions for our customers.

In 1953, Mascot was the first Norwegian manufacturer to introduce car radios in Norway. During the 1950s, Mascot radios became widely popular due to their superior reception, both in Norway and in mountainous regions in Europe and the Near and Middle East. In the early 1960s, Mascot even established a manufacturing joint venture in Turkey to meet the demand in this region.

Market Adaptability

Our experience goes well beyond radios and manufacturing abroad, however. As the radio business became increasingly competitive throughout the 1960s, Mascot looked to utilize its development and manufacturing know-how in new ways and found an exciting emerging market in telephone answering machines. For over 35 years, Mascot manufactured these machines under the brand name Ekkofon, which for many businesses became synonymous with the name for an answering machine.

From radios to power supplies

In addition to our manufacturing base, Mascot started in the 1970s also to import stereo and video equipment from the Far East. These were sold under both the Mascot and Silver brand names, and this continued until 1989.

The power supply business came out of the need for battery eliminators for Radios. These were promoted for the first time in 1964. The range of power supply products has grown considerably since then, reflecting changes in customer demands and technology.

Mascot today

Today, Mascot is a leading manufacturer of power supplies and battery chargers. Our main offices are located in Fredrikstad, Norway, and production can either take place in our own facilities in Tallinn, Estonia, or in Ningbo, China. With this flexibility, we are prepared to serve your needs for quality products at competitive prices and lead times.

Product line

Mascot offers a wide range of power supplies, desktop or wall plug style:

  • AC/AC
  • AC/DC
  • DC/DC Converters
  • DC/AC Inverters
  • Battery chargers for Li-Ion, NiMH, and Lead Acid batteries

Custom design

In addition to our standard product range, we have broad experience in developing and manufacturing power supplies designed from customers’ own specifications. These can range from small modifications of existing standard models to entirely new models, encapsulated or open frame. Contact us for a quote, and experience the Mascot way of doing business: True to the power of quality.

CATALOGUE
logo-eyecap

ABOUT EYECAP

Eyecap is a leading manufacturer of electrical and fireproof materials. It specializes in development and manufacturing of electric insulation and fireproof materials with enhanced performance.

It meets CE and Reach with eco-friendly materials, and its arc resistance performance is over 10 times higher than that of flame retardant PVC materials, making it possible to prevent spontaneous ignition due to contact failure and overheating caused by overload.

INSULATING CAP A
INSULATING CAP B
INSULATING CAP C
EYECAP WT
EYECAP CPT 1H
3.-LS-Materials-Logo_jpg-300x58

New-generation energy storage device with
great power and reliability

2023-05-05 (7)
2023-05-05 (5)
2023-05-05 (3)
2
2023-05-05 (9)
2023-05-05 (11)
2023-05-05 (13)
COMPANY PROFILE

ABOUT CADEX

For over 35 years, Cadex Electronics has been at the leading edge of battery technology. Serving customers in over 100 countries globally, helping clients to achieve the most from their mobile power applications. Cadex technology and products, including custom battery packs, smart chargers and advanced battery analyzers, optimize battery use in all phases of battery life cycle management, increase up-time and availability of critical equipment, and decrease operating costs. With headquarters in Vancouver and offices in Europe and Asia, Cadex makes battery systems more reliable.

CADEX BATTERY ANALYZER
CADEX BATTERY ADAPTER

ABOUT FRIWO

Empowered by FRIWO: innovative system supplier of smart power supply units and drive solutions

Since 1971 FRIWO has produced well over a billion power supply solutions and this has given us leading technological expertise throughout the whole industry.

As an international systems supplier, FRIWO develops and produces digitally controllable power supply units and drive solutions from a single source. The product portfolio includes smart components for electric drives as well as premium technological chargers, battery packs, power packs, and LED drivers. All components of a modern electric drive are also provided: from the display, motor control unit and drive unit to the control software.

Ambitious solutions for industries focusing on the future

The company’s products cover a whole host of applications. FRIWO’s knowledge in the field of charging technology is particularly appreciated by those in the demanding markets of electric mobility, mobile tools, and robot lawnmowers. In the case of power supply units, the focus is mainly on applications in the medical technology and healthcare sectors, industrial automation and mechanical engineering as well as high-quality consumer electronics. FRIWO LED drivers can be found both in professional interior lighting and in weatherproof exterior lighting. The components for electric drives are mainly used in the field of electric mobility, for example in battery-powered scooters. Our customer base includes renowned global companies in the very future-oriented industries mentioned above.

With modern development centers, manufacturing facilities and sales locations in Europe, Asia and the US, FRIWO is present in all of the world’s key markets. The FRIWO brand stands for innovative strength, security, safety, quality, and efficiency around the world. As proof of this, we are certified according to DIN ISO 9001 (Quality Management), DIN ISO 14001 (Environmental Management), and DIN ISO 13485 (Quality management for medical devices).

MAIN CATALOGUE
EMERGE FLYER
haidi logo

ABOUT HAIDI

Haidi Energy is one of the leading lithium battery manufacturers and high-tech companies in China. We are specializing in the research, development, manufacturing, and sales of lithium iron phosphate(LiFeP04) batteries and lithium-ion(NMC) batteries. Our standard workshops cover about 200000 square meters for the cathode powder, battery cells, and battery packs production. We have more than 750 employees and 90 experienced R&D Engineers. After years of success in the global market, our R&D team is dedicated to continual product development to improve the performance reliability of our product range. We have an extensive range of lithium batteries for different kinds of applications. Lightings Lead Acid Replacement Medical Equipment Marine & Electric Boat Telecommunication UPS, Backup Power Military Equipment Electric Vehicles Energy Storage Systems Haidi Energy was certified with ISO9001, IS014001, TS 16949 and OHSAS18001 management systems. Our products have obtained UL, CE, TUV, IEC62133, CCA, KC, BIS, ROHS, UN38.3 MSDS certificates, and also have worldwide Product Liability Insurance. Our goal is to provide the best service in helping our customers to achieve sustainable and economically sensible power and energy management practices. Whether it is reducing our dependencies on coal-fired generation facilities, reducing carbon emissions, or accelerating the adoption of renewable integration and alternative-fuel vehicles. Haidi Energy- A Leading LiFePO4 Batteries Manufacturer.

PRODUCT BROCHURE
logo-arch
ABOUT ARCH

Arch Electronics Corp. – a company keeping the future in mind with innovative products and services. Established in 1986, Arch is an organization approved by ISO-9001 certification which assures our product of quality.

ARCH is specializing in AC-DC switching power supplies, Medical power modules, AC-DC power modules, and DC-DC converters.

The production is located in Taiwan and China.

Besides the standard product, the Company’s design team is aimed to the customers’ requirements no matter, whether it is a modification to an existing standard product or a pure idea from new development with customer-oriented solutions.

Lian Dung Logo

In 1989, Lian Dung was established by our president
Lian Dung Electric Wire Material Co., Ltd. was established in 1989 in Feng Yuan. As one of the most famous international power cords, a few years ago, Lian Dung started setting up subsidiary companies in a different country; there are 3 factories in China (in Dongguan and Hangzhou) and one branch office in Hong Kong.

Growth & Improvement
We start from a small factory, owning a few items to sell then we have a complete series of products in electrical wire/plug/connector, in the end, we become a well-organized group. No matter what we are making and no matter how much quantity it has been made, we are persisting our expertise in this field and maintain the policy of making them better for tomorrow.

Quality, Quality…and Quality
How we can do to stick to the quality issue? We did a lot in every aspect: For example, for customer focus, we tried to increase revenue and market share through fast/flexible responses. As to leadership, increase employee motivation towards company goals and objectives. Then, for people involvement, create innovative solutions to further company goals and objectives. In the process approach, we decrease costs and cycle time through effective resource management. Speaking of the management system approach, we have to integrate and align the processes that best achieve the desired results. In the meantime, for continual improvement, we gain competitive advantages through improved company capabilities. Lastly, for supplier relationships, we develop mutually beneficial relationships to reduce the costs of resources.

CATALOGUE
Arts Energy


“The ambition of ARTS Energy since January 2020 is to be recognized as a major player in the battery market. Our multi-technology offer, the connectivity of our products, and our tailor-made offer are the very heart of our new strategy. All of these elements, coupled with the digital transformation of our manufacturing plant, will undoubtedly help meet the innovative needs of our customers. We are proud to use our know-how to support the evolution of their applications. “

Frédéric DITTMAR, CEO


Committed to sustainable respect for an environmental approach
The Versace production site is an installation classified for environmental protection and the production tool is therefore subject to permanent control, allowing optimal management of our discharges, to control our impact on the environment. . The treatment of our discharges is ensured by a wastewater treatment plant, which precisely follows the objectives of ISO 14001 certification. This ensures that residents have a minimal environmental impact. On the other hand, a complete firefighting installation secures the manufacturing site of energy storage solutions.

For all of its battery and accumulator products, ARTS Energy studies the potential impact on the environment at each stage of the life cycle to permanently improve its environmental approach.

 

Our teams develop rechargeable batteries to reduce the environmental footprint and the impact of our customers’ end applications, by prioritizing service life, quality materials, and a design that facilitates recycling. ARTS Energy makes recycling channels available to its customers for its used products.

Our choices of raw materials are also dictated by this policy of excellence and respect for the environment, so we favor suppliers who are ISO 14001 certified or comply with the environmental and regulatory constraints in force (ROHS, REACH, etc.).

The ARTS Energy company is also committed to an energy consumption optimization approach, thus limiting its indirect environmental impact.

From design and manufacture through their applications to final collection and recycling, ARTS Energy batteries, accumulators, and storage systems provide an appropriate solution for a cleaner world.

 

Protection for employees & environment
ARTS Energy is constantly adapting its industrial facilities to protect the health and safety of its personnel. This involves a casing of machines (bringing machines up to safety standards), a dust extraction system on certain element assembly stations, and the provision of specific protective equipment for employees, to improve in permanent working conditions.

Potential pollutants at workstations are monitored and eliminated by filtration. Our employees also benefit from regular monitoring.

SELECTOR GUIDE
SMALL SOLAR ENERGY
vinatech logo

VINATech endeavor to fulfill the happiness of our customers, employees, and shareholders as well as our society, by offering environmentally-friendly products

VINATech is the leading supercapacitor manufacturer and provides an energy-saving device including Hybrid Super Capacitor and Lithium Hybrid Capacitor. VINATech provides Fuel Cell materials including Catalyst support, Pt/C Catalyst, and Membrane Electrode Assembly(MEA) comprehensively with securing Carbon technology which VINATech has researched and developed for environmentally friendly future growth. It is applied as many as areas from Social Infrastructure for building Smart City to hydrogen fuel cell-related area.

CATALOGUE
routejade logo

ABOUT ROUTEJADE

Routejade has been growing continuously as a one of the main manufacturer of lithium-ion batteries. furthermore, with its own patent ‘Encapsulation’, It has been providing the best lithium-ion batteries to many customers worldwide.

NVK Logo

ABOUT NVK

New V-Key Technology is a leading custom and medical cables, connectors, accessories, and cable assembly manufacturer. By OEM medical cable assemblies since 1990, NVK has knowledgeable team accumulated relative manufacturing experience and engineering expertise till now to offer ODM and custom-made product.

The company takes advantage of our strong supply chain management to reduce and control cost and time to market for our customer base. NVK is qualified with GMP, ISO 13485, CE, and FDA manufacturer registration to guarantee and maintain product quality.

Ansman Logo

ABOUT ANSMANN

Mobile energy – when and where you need it. ANSMANN is your reliable companion in the world of energy. For more than three decades, ANSMANN has been at the forefront as the world’s leading expert in battery, accumulator, charging, drive and lighting technology – we understand the language of energy like no other.

HCB Logo

ABOUT HCB

HCB Battery Co., Ltd. was founded in 2004. As a leading primary lithium battery manufacturer and solution provider in China, HCB remains dedicated to leading the R&D and manufacturing of various types of primary lithium batteries.

With every improvement that is made, HCB continues to pursue perfection. Technological development & innovation are of great importance to HCB. The company has been focusing on providing reliable primary lithium battery & services to the customers worldwide for more than 17 years.

RePower Logo

ABOUT REPOWER

Established in 2003, RePower Technology Co., Ltd ( below called RePower) specializing in providing battery testing systems, self-design and construction build automatic production line for battery factories , new energy car factories , energy storage battery companies , national testing institutions , scientific research institutions .

Pro Car Logo

ABOUT PRO CAR

For over 30 years we have been developing, producing, and distributing high quality connecting systems in the 12-24 Volt range, providing customers with safe connections for on-board electrical systems in cars, trucks, mobile homes, motorbikes and boats.

Adding products, which have been especially developed for mobile applications through modern LED lighting technology as well as USB charging technology.

PAG logo

ABOUT PAG

PAG is the original designer and manufacturer of high-end batteries and chargers for cameras and accessories used in broadcast acquisition, video production and digital cinematography.

The company is best known for its intelligent linking battery systems which are the choice of camera professionals around the world.

PAG products are conceived and constructed in the UK, using patented technology that is designed to assist you in your work.

This website uses cookies to ensure you get the best experience on our website, by clicking OK you also accept the terms of service and our privacy policy.

OK