12 Vdc +/-30%

12Vdc, 24Vdc +/- 30%, 48Vdc -30% +25%

12Vdc, 24Vdc,+/- 30%, 48Vdc -30% +25%

17-32Vdc

24-32Vdc, 12-16Vdc. Configured to prevent depletion of source battery.

5Vdc using main 230Vac input power adaptor (supplied)

9-32Vdc

9-32Vdc (Automatic Referencing)

Auto-Select, 85-135Vac and 170-265Vac, 50/60Hz

EN50121-3-2 to EN61004-4

Meets EN50155: 2007, EN50121-3-2: 2006

Meets ISO7637-2 International standard for 12/24V vehicles

Meets ISO7637-2 International standard for 24V vehicles

Meets ISO7637-2 International standard for 24Vdc commercial vehicles

<100mV pk-pk at continuous load.

<50mV pk-pk

<50mV pk-pk (100mV on 24V units) at continuous load. Meets CISPR25

<50mV pk-pk (100mV on 24V units) at continuous load. Meets CISPR25 and VDE0879-3

<50mV pk-pk (100mV on 24V units) at continuous load. Meets CISPR25.

<50mV pk-pk at continuous load

<50mV pk-pk at continuous load. Meets CISPR25

-25ºC to +30ºC to meet this specification table+30ºC to +80ºC de rate linearly to 0A

50%-60%

90%

Light on 98mA @ 12V, 48mA @ 24V

Typically 83%

Typically 85%

Typically: 85%

Typically: 90% for non-isolated units, 85% for isolated units

Typically: 90% for non-isolated units, 85% for isolated units ** 95%

Typically: 90% for non-isolated units, 85% for isolated units, *95%

Typically: 93%

Wireless Charger: 50%-60%; USB Charger 90%

100%

95% max, non-condensing

95% max., non-condensing

4 core cable, *4 wires (1m in length) stripped and tinned for individual connection

Five 6.3mm push on flat blade connectors

Five 6.3mm push-on flat blade connectors

Five 6.3mm push-on flat blade connectors 6-way 070 connector (PV12s-A)

Four 6.3mm push on flat blade connectors (72-240W) Five terminal connector with screw tightening with mating half supplied (400W and 600W units)

Four 6.3mm push-on flat blade connectors

Four 6.3mm push-on flat blade connectors, *5 way Phoenix connector including enable on/off terminal and mating half

IEC-320 C14 socket, C13 terminated cordset 6.3mm push-on blade terminals 6.3mm push-on blade terminals, adjacent to input (additional external ground if required)

Input: 6.3mm push-in flat blade connectors On/off switch incorporated

Input: 6.3mm push-in flat blade connectors Output: USB type 'A' single socket - tested to 10,000 mating cycles

Input: 6.3mm push-in flat blade connectors Output: USB type single/double socket - tested to 10,000 mating cycles

Input: 6.3mm push-in flat blade connectors Output: Wireless transmission <200kHz

Input: Power supply plug Output: Wireless transmission <200kHz

?Click ?n? Fit? mounting clip or rubber feet. DIN rails clips available required

‘Click ‘n' fit mounting clip, fitted separately using 3 hole fixing (4 hole on 400W and 600W)

‘Click ‘n' fit mounting clip, fitted separately using three hole fixing

‘Click ‘n’ fit mounting clip, fitted separately using three hole fixture or use of two DIN rail clips

‘Click ‘n’ fit mounting clip, fitted separately using three hole fixture, *4 hole cradle

‘Click ‘n’ Fit’ mounting clip or rubber feet. DIN rails clips available required

30mm diameter hole with or without bezel. USB2 for non through fitting applications

30mm diameter hole, secured by rear nut or front-fitting bezel

Box with mounting screw holes - screws provided. Can also be installed by clips or other bespoke method

By rubber feet on base and direct attachment to radio above

Click ‘n’ fit mounting clip, fitted separately using three hole fixture

Click ‘n’ fit mounting clip, fitted separately using three hole fixture **4 hole cradle

Enclosure with underside securing plate into Ø80mm hole

PT10/20 tie wrap to wiring (supplied) PT40/60/100/200 3off half inch No8 pozi pan head screws (supplied)

Protected by filters and rugged component selection

2014/30/EU The general EMC directive 2014/35/EU The low voltage directive 93/68/EEC The CE marking directive

2014/30/EU The general EMC directive 93/68/EEC The CE marking directive AES5, ECE R118.02 and UL 94: V-0

2014/30/EU The general EMC directive Regulation 10 The automotive directive 93/68/EEC The CE marking directive

2014/30/EU The general EMC directive Regulation 10 The automotive directive 93/68/EEC The CE marking directive AES5

2014/30/EU The general EMC directive Regulation 10 The automotive directive 93/68/EEC The CE marking directive AES5, ECE R118.02 and UL 94: V-0